I lied.  I am working on IPv6 now.  I’ll do IP Services later.  I am pretty happy with IPv6.  Unfortunately the NM-16-ESWs in my 3640s on Dynamips have a fart when you try and configure an L3 Etherchannel between them.  Now I dont know if this is a Dynamips specific drama, if its the IOS I’m using, or if its the NM-16ESW itself.

*Mar  1 01:22:08.799: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/15, changed state to up

SW-1(config-if-range)#channel-group 1 mode on

SW-1(config)#interface range f0/14 - 15
SW-1(config-if-range)#no switchport
*Mar  1 01:21:46.411: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/14, changed state to up
*Mar  1 01:21:46.495: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/15, changed state to up

would not accept channel-group command with no switchport

SW-1(config-if-range)#switchport
SW-1(config-if-range)#channel-group
*Mar  1 01:22:08.763: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/14, changed state to up

Creating a port-channel interface Port-channel1

OK, L2 channel seems ok

SW-1(config-if-range)#
*Mar  1 01:22:15.135: %EC-5-BUNDLE: Interface Fa0/14 joined port-channel Po1
*Mar  1 01:22:15.171: %EC-5-BUNDLE: Interface Fa0/15 joined port-channel Po1
SW-1(config-if-range)#no switchport

Lets try making the channel group then making it L3 after

SW-1(config-if-range)#
*Mar  1 01:22:18.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Port-channel1, changed state to up
*Mar  1 01:22:18.571: %EC-5-UNBUNDLE: Interface Fa0/14 left the port-channel Po1
*Mar  1 01:22:18.575: %ESWILP_FLTMG-7-INTERNAL_ERR: Internal error: *** failure to create entry in vtable/vlan 1006/unit 0 -Traceback= 0×603C5124 0×62445AD0 0×6242F2D4 0×62435C50 0×62446340 0×6047F6C4 0×62439F9C 0×6240F680 0×624176B0 0×604057D8 0×604218B0 0×604C229C 0×604C2280

ARRRGGGGHHHHHHHHH

SW-1(config-if-range)#
*Mar  1 01:22:18.595: %EC-5-UNBUNDLE: Interface Fa0/15 left the port-channel Po1
*Mar  1 01:22:19.595: %LINEPROTO-5-UPDOWN: Line protocol on Interface Port-channel1, changed state to down

Up yours Cisco!!!

Played around with it for a bit… Traceback city no matter what I did.  Im not that fussed though, Im pretty happy with RIPng anyway.  I already know how to make L3 Etherchannels so its all good.  I might come back later and just do some inter-router RIPng stuff rather than trying to do it over L3 Etherchannels.  It’s no different really.

Narbik’s OSPFv3 labs are just router only… Let’s try those.

I spent a lot of time on BGP.  Narbik has some nasty regexps in his bootcamp book.  Hopefully they aren’t that nasty in the real lab.

My local Hungry Jacks would have me on their VIP list now.  This study stuff has increased my HJs (Burger King to the rest of the world) intake into orbit.  So much so that will be opening a HJs on the International Space Station just for me!  I have also been relaxing during down time by getting into playing Poker in the National Poker League and watching the World Poker Tour on Joost.  Vince Van Patten is a legend!

Anyway…

I will start work on IP Services now.  I always find that stuff pretty easy.  Security will be next… that’s pretty straightforward too.

So how about Spain last night?  Isn’t it amazing what Fernando Torres can do with a decent bunch of players around him.  Shame he has nothing like that at his current club… Well it’s not a shame really ;)  I was hoping Germany would win but Spain did the business.  Now all I can hope for is Christiano Ronaldo to piss off to Real and for Chelsea to sign Robinho!